Each life converges to some centre
Expressed or still;
Exists in every human nature
A goal,Admitted scarcely to itself, it may be,
Too fair
For credibility’s temerity
To dare.— Emily Dickinson, from Each Life Converges to some Centre
Whether the flutes of this walnut bowl radiate outward or converge inward may depend upon your point-of-view or mood, but from the perspective of a carving gouge, they converge. To work into supported fibers, the cutting edge begins at the rim of the bowl and sweeps downward to the center. I carved the same design not long ago in cherry. You can see it in this post. I forgot to take any process shots with this one, but I’ll include various photos of the bowl as I discuss the procedure a bit.
In both cases, the flutes were carved with a long-bent gouge, #5 sweep 16mm wide. A steeper sweep would make the ridges between flutes a little too pronounced and possibly vulnerable in use. While a shallower sweep like a #3 makes it more difficult to distinguish the ridges and define the flutes.
I don’t draw any guidelines before carving the flutes. The width of the gouge itself keeps the width of the flutes at the rim reasonably similar. I do like to put a little pencil mark in the center of the hollow. That is my target point as the gouge makes its way downward and toward the center. As the edge proceeds from rim to center, I ease up on the downward pressure exerted by my left hand on the shank of the tool, allowing the flute to simultaneously decrease in width and become more shallow. This creates a tapering flute.
I work my way around the bowl in a rough pass, then go back around once again more carefully. When I see I have around six or seven flutes to go on the first pass, I adjust the spacing for the remaining flutes just a touch to make sure I carve a full flute next to where I began. After a couple passes, I try to leave it alone. I want the subtle variations and tool marks from the hand process to remain.
I think on another bowl with converging flutes someday, I may incorporate Emily Dickinson’s thoughts with some carved lettering. Lot’s of ideas for that and other pieces, I know I haven’t posted much for sale lately, but soon.
All I can say is: Mon Dieu–it’s a marvel–
LikeLike
Merci, Marie! Loved Peter’s post with photos from the bird outing the two of you had recently.
LikeLike
Hi Dave,
I like this bowl a lot. You may recall my interest in carving flutes. Please let me know if this one is available.
Thank you,
Larry
LikeLike
Larry,
This one was by request, so about to be on it’s way. I’m catching up on some other requests and will be getting to some more ideas — logs are waiting — that I will be able to post for sale. Among those, I’ll make some bowls with flutes like these again. Thanks for your interest. Hope you’re getting in some good turning and carving time!
LikeLike
I used your technique to turn a potential negative, off-centered “eye”, into something I think works.
Any way I can insert a picture here?
Beautiful piece…a joy to the eye!
LikeLike
I’d love to see it, Gene. Send me the photo in an email and I’ll see if I can post it in a reply.
LikeLike
I second francedozois’s comment. Swooning.
LikeLike
Thanks, Nancy.
LikeLike
Absolutely stunning
LikeLike
Thanks, Jen. Hope you’re knee deep in spoons and shavings!
LikeLike
Beautiful lines and lovely fluting
LikeLike
Thanks, Warren. Hope all is well down under.
LikeLike
WOW
The rim detail is inspired!
LikeLike
Thanks, Norm.
LikeLike
Beautiful Dave. I’m guessing this is the one you had underway at FWWL? If so, I’m glad I have a picture to compare the completed with what I held two weeks ago. Incredible process. I had an a-ha moment when I received the Langsner froe ordered from Lie-Neilson. It split a pretty dry piece of 4″ ash I had on the second hit. My Woodcraft froe wouldn’t hardly make a mark. That was encouraging for being a work in progress.
LikeLike
Yep, Scott, that’s the same bowl, now with the necklace fully carved and all oiled. Glad you got the froe. Drew Langsner’s design for that froe is really well developed. When you were telling me about your previous froe during Peter’s spoon class, I had a feeling it was the same one I had at one time. Brought back frustrating memories!
LikeLike
Thankfully, hopefully, we learn as we go. From our own mistakes and others experience.
LikeLike
So very lovely!
On Sun, May 6, 2018, 1:49 PM David Fisher, Carving Explorations wrote:
> Dave Fisher posted: ” Each life converges to some centre Expressed or > still; Exists in every human nature A goal, Admitted scarcely to itself, it > may be, Too fair For credibility’s temerity To dare. — Emily Dickinson, > from Each Life Converges to some Centre Whether the flu” >
LikeLike
“Love is a canvas furnished by nature and embroidered by imagination.” Voltaire
LikeLike
Thanks for sharing that one, Cindy. Really nice.
LikeLike
As always, just outstanding! Love every part of this design, Great work Dave, thanks for sharing! JReed
LikeLiked by 1 person
Wonderful, extremely strong piece Dave. Thanks for sharing! Barry
LikeLiked by 1 person
Really enjoy the flutes in the bowl, I’ve only done them on the outside. Do you create the flutes while the wood is still green or after it has dried?
25 days and counting!
LikeLike
I do the flutes after drying. 25 days! I’d better get ready.
LikeLiked by 1 person
New gouge arrived. Going to be attempting this technique this evening.
This is where impetuous meets trepidation.
LikeLike